3M™ Cushion-Mount™ Plus Plate Mounting Tape E1115H, Tan, 1372 mm x 23 m, 0.38 mm
- 3M ID 7000042374
Details
Highlights
- Tan, flexo plate mounting tape with air release feature with high plate side adhesion
- This 0.015 inch (0.38 mm) tan, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates
- Cushioned flexographic plate mounting sticky back tape
- Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
- Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
Provides high quality process print. The adhesives remove cleanly from the print plate and the print cylinder.
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1115H with easy mount adhesive and higher plate side adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality tone reproduction where process printing is important. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.
Typical Properties
Resources
